Intelligent heating and cooling equipment is mainly used to control the temperature of various reactors. Compressor cooling is used to heat the heat transfer oil, and the medium in the cold tank is heated to high temperature by the heater. According to the needs of users, the temperature of the storage tank medium in high and low temperature environments can be quickly adjusted. Long-term operation will cause fouling on the surface of the condenser of the equipment, which will seriously affect the normal operation of the high and low temperature equipment in the laboratory.
1. The intelligent heating and cooling equipment is an integral equipment. The refrigeration system and the heating system are installed in the same case. This equipment is generally installed indoors and placed on a well-ventilated, dust-free, cool ground or test bench to avoid droplets. , water vapor, high-frequency equipment (high-frequency welding machine), and places where acidic solutions are frequently used.
2. If you want to clean the equipment, you must disassemble the machine first, because the parts to be cleaned are invisible inside. The various parts of the refrigeration unit intersect with each other, and the pipelines are complicated and difficult to disassemble. First of all, we must understand the basic situation of the entire structure.
3. Clean the connection between the equipment and the condenser. After disassembling in the previous step, find out the direction of the water inlet of the condenser, connect it to the water inlet or water outlet of the water pump, and then use tools to heat the pipe.
4. After confirming that each step is completed, add clean water to wash for 20 minutes, then discharge the sewage, repeat this three times, and finally need cleaning agents. Of course, the pH value should be kept between 4-5 for 2-3 hours.
5. After cleaning, install it according to the original shape. This is the main step for cleaning intelligent heating and cooling equipment.
No comments:
Post a Comment